 |
Roof pitch 15° or less, rafter centres up to 600mm. |
Roof pitch 15° or less, rafter centres greater than 600mm & not exceeding 1200mm. |
Roof pitch more
than 15°, rafter centres
up to 600mm. |
Roof pitch more
than 15,° rafter centres greater
than 600mm & not exceeding
1200mm. |
| Setting out point for fascia board |
25mm below line of Top edge of tile battens. |
30mm below line of Top edge of tile battens. |
25mm below line of Top edge of tile battens. |
25mm below line of Top edge of tile battens. |
| Install eaves batten to rear of fascia board |
Classic, Elegance & Plus Tile: Install eaves batten the same size as tile batten installed behind fascia board (leave 20mm gap between batten and fascia).
Decra Stratos: Install 50mm x 30mm eaves batten behind fascia board (leave 20mm gap between batten and fascia).
|
Install treated timber firring piece on top of rafters, each firring piece should have a finished size of 580mm x 16mm x rafter width. 16mm end of firring should butt up against the back face of fascia board.
Install 50mm x 25mm eaves batten behind fascia board (leave 20mm gap between batten and fascia).
NOTE Classic, Elegance & Plus Tile: First tile batten 50mm x 42mm, remaining tile battens should be 50mm x 50mm.
NOTE Decra Stratos: First tile batten 65mm x 38mm, remaining tile battens should be 50mm x 50mm.
|
All tile profile except Oberon: Install Eaves batten the same size as tile batten installed behind fascia board (leave 20mm gap between batten and fascia).
Oberon only: Install arris rail 200mm x 25mm (finished size), installed behind fascia board (leave 20mm gap between arris rail and fascia).
|
All tile profile except Oberon: For rafter centres 900mm & 1200mm, 15° - 17.5° pitches: 50mm x 38mm eaves batten installed behind fascia board (leave 20mm gap between batten and fascia).
All tile profile except Oberon: For rafter centres 900mm & 1200mm, 17.5° + pitches: eaves batten the same size as tile batten installed behind fascia board (leave 20mm gap between batten and fascia).
Oberon only: Install arris rail 200mm x 45mm (finished size), installed behind fascia board (leave 20mm gap between arris rail and fascia).
|
| Install Decra Eaves Guard |
Classic, Plus Tile & Elegance: Install Eaves Guard 400.
Stratos Tile & Oberon: Install Eaves Guard 370. |
Classic, Plus Tile & Elegance: Install Eaves Guard 400.
Stratos Tile & Oberon: Install Eaves Guard 370. |
Classic, Plus Tile & Elegance: Install Eaves Guard 400.
Stratos Tile & Oberon: Install Eaves Guard 370. |
Classic, Plus Tile & Elegance: Install Eaves Guard 400.
Stratos Tile & Oberon: Install Eaves Guard 370. |